This Ergo Injector with suction hose features an ergonomic handle with a foam injector for foam cleaning. This allows accurate mixing of water and chemicals (0.15–10%) and foam release onto surfaces. Fits both large and small containers. A suction hose and filter are provided.

Vikan Ergo injector with suction hose, 290 mm, , Black

Nozzle kit for foam sprayers, cleaning stations, dosing devices, injectors, and chemical suction hoses. Dosage from 0.40% to 10%.

Vikan Set of nozzles, 75 mm, ,

This is a replacement piece for the Vikan Foaming Set (9303x). A rubber coating ensures a good grip during use, even in wet conditions. The foaming gun has a 1/2" nozzle that can connect to a 1/2" Q coupling. The front of the foaming gun can be connected to the rinsing nozzles, 9350, 9352, and 9354. Never allow chemicals to flow directly through the foaming gun.

Vikan Watergun for Foam Sprayer 1/2"(Q), Black

Intended for rinsing surfaces and equipment after foam cleaning, this 65-cm angled jet spray is ideal for rinsing foam from under tables and hard-to-reach areas. The small nozzle produces a powerful stream that can be angled 15 degrees. Fits Vikan water guns 93209 and 93219.

Vikan Angled jet spray, small nozzle, 1/2"

Hang your 5 litre buckets on this stainless steel wire rack for easier floor cleaning in dosing units and cleaning stations. Screws and wall plugs included.

Vikan Stainless steel wire rack, 200 mm, ,

Mount with a nozzle for use in connection with foam cleaning. The water gun has a functional design with continuously variable water supply. The trigger is equipped with a closing and opening device. Connected with 1/2" clutch housing.

Vikan Combi watergun for foam sprayer, 165 mm, , Black

Intended for rinsing surfaces and equipment after foam cleaning, this adjustable nozzle produces a compact, powerful stream that loosens stubborn soils in hard-to-reach areas. Fits Vikan water guns 93209 and 93219

Vikan Adjustable nozzle, 1/2"

Rack for wall mounting. For use with 10L containers.

Vikan Stainless steel wire rack, 285 mm, ,

Hose and foam sprayer suspension for wall mounting. Maximum 20 metre hose.

Vikan Stainless steel suspension for foam sprayer, 9301x/9305x, 290 mm, ,

Use this Plastic Lid to protect against chemical evaporation when the container is not in use. If the container tips over, the lid will also provide protection against chemical spills.

Vikan Plastic lid for container, 110 mm, , Black

Intended for rinsing surfaces and equipment after foam cleaning, this small-nozzle plastic jet spray produces a powerful stream that can be angled 15 degrees. Fits Vikan water guns 93209 and 93219.

Vikan Jet spray plastic, 1/2"

Hose used in conjunction with Condensation Squeegee code 7716x and Handle code 2973Qx, which allows condensation to drain safely away from the ceilings and pipes.

Vikan Outlet hose, 1500 mm, , White

Foam Injector for foam cleaning. Water and chemicals are always mixed in the correct dosage from 0.40 to 10% and are foamed on the surface. Fits both large and small containers. Suction hose and filter provided.

Vikan Injector with suction hose, 260 mm, , Black

Hose suspension for wall mounting. Maximum 20 metre hose.

Vikan Stainless steel hose suspension, 550 mm, ,

Suction hose with filter for foam injector and spray injector.

Vikan Suction hose for injector, 93139 & 93149, 160 mm, , White

For use with foam sprayers 9300, 9301, 9305 and 9306 as protection against chemical backflow into the water supply system.