Dispersion in free fall with Sympatec GRADIS is an option for dry, free flowing products, which do not tend to agglomerate. Especially coarser or sensitive powders and granules are gently dispersed when accelerated by gravity on their way into the measuring zone. Together with the sensors HELOS and QICPIC for laboratory applications and inside MYTIS and PICTIS for industrial applications.

Sympatec GRADIS, gravity disperser

Sympatec OASIS combines powerful dry and wet dispersers in a single device. It consists of the renowned dry disperser RODOS in the lower part and a special adaptation of the well-established wet disperser SUCELL on the upper part. Both units operate fully automatic under the control of the software or manually via the control panel.

Sympatec OASIS, combined dry and wet dispersing system

Sympatec SUCELL is an automated wet dispersion unit for particle size analysis of various types of suspensions or emulsions in the size range of 0.1 µm to about 2,000 µm. It operates in a closed loop and can be used with all sensors of the HELOS laser diffraction family and as SUCELL/L with the QICPIC image analysis sensor.

Sympatec SUCELL, wet dispersing system

size

Sympatec SUCELL L, wet dispersing system

Sympatec RODOS is the original by the inventor of dry dispersion. With this breakthrough innovation, Sympatec has opened up dry applications to particle measurement technology – as early as 1982. Since then, it has been possible to dry measure powders, fibres and granules in a manner appropriate to the product , with both laser diffraction and dynamic image analysis. No other method of dispersing is anywhere near as powerful or achieves such an efficient as well as gentle dispersion from the submicron to millimetre range.

Sympatec RODOS, dry dispersing system

The L-series consistently evolves the strengths of the proven RODOS dry dispersion and in its most recent stage of evolution offers a particularly resistant dispersing line and a modular design. With its new handy and compact design, the disperser is optimally tailored to the requirements of HELOS laser diffraction and QICPIC image analysis. Perfectly reproducible measurement conditions are ensured for any application thanks to the automatically positioned dispersing line.

Sympatec RODOS L, dry dispersing system

Due to its open and modular design Sympatec LIXELL represents together with the image analyser QICPIC the most versatile measuring system over a particle size range of 1 µm to 2,000 µm. With different models of cuvettes and accessory parts numerous applications starting at a sample volume of 20 ml can be realised. Depending on the set-up LIXELL can be operated in flow-through or circulation mode. Chemically resistant sealing and tubing materials are available for aggressive media.

Sympatec LIXELL, wet dispersing system

Sympatec FIBROS is a dry disperser specially designed for the gentle separation of dry as well as heavily entangled fibre collectives and the subsequent analysis with QICPIC. Fibre parameters such as length, diameter and straightness can be measured automatically without the time consuming manual separation of the individual fibres. High efficiency and throughput of the separation is obtained by the well-known and proven method for cotton spinning “combing and carding”.

Sympatec FIBROS, fibre dispersing air jet feeder

Sympatec QUIXEL is the advanced wet dispersing system suitable for particle size analysis on all kinds of suspensions and emulsions in the size range of 0.1 µm to 3.500 µm. Its innovative, tubeless design enables very fast measuring cycles. Even high density particles such as 3 mm ball bearing beads made from stainless steel are safely transported in water through the flow through cell without the need for using special liquids of high viscosity. The wet dispersion process is supported by a built-in ultrasonication unit, which is adjustable by software from 0 to 60 W in 1% steps.

Sympatec QUIXEL, wet dispersing system

The large volume flow cuvette Sympatec FLOWCELL is applicable for the dynamic image analysis with QICPIC of suspensions with coarse particles from 10 µm to more than 10,000 µm. The particle size for soft disperse materials extends up to 16,000 µm. Flow diameters of 10 mm and 20 mm enable a sample throughput of more than 10 l/min and 20 l/min, respectively, to achieve representative particle numbers.

Sympatec FLOWCELL, wet dispersing system

The Sympatec CUVETTE is a wet dispersing system for Sympatec laser diffraction sensor HELOS and is specially designed for particle size analysis of suspensions and emulsions with small sample volumes of less than 50 ml as CUVETTE 50 and SYSIPHUS or less than 6 ml as CUVETTE 6.