To optimally and safely store sensitive substances, such as antibodies and cell cultures, Liebherr laboratory freezers have precise electronic controls and integrated alarm systems. In Liebherr laboratory freezers with Profi electronics, 3-point calibration allows highly accurate temperature control. All appliances comply with the NF X 15-140 standard, with regard to maximum temperature stability and consistency.

Liebherr LGPv 1420 laboratory freezer, −9 °C to −26 °C, 1366 L, (mm) 1430 x 830 x 2160, Comfort electronic controller, stainless steel inner liner, steel door

Liebherr LGPv 8420 laboratory freezer, −9 °C to −35 °C, 855 L, (mm) 790 x 980 x 2160, Comfort electronic controller, stainless steel inner liner, steel door

The Labconco Protector XStream Fume Hood takes containment, safety and energy savings to the extreme. This general chemical, high performance fume hood was independently tested and challenged well beyond the SEFA-1 standards. With a face velocity of 40 fpm and sash fully open, the Protector XStream was subjected to 50 fpm cross drafts, NIH protocol, and tracer gas measurements in the chest of the mannequin. In all scenarios, the Labconco Protector XStream Fume Hood allowed 0.00 ppm average level of tracer gas outside the fume hood. Although your safety officer will determine the actual face velocity setting for your laboratory, the ability of this hood to contain under these adverse conditions sets a new standard of safety.

Labconco Protector® XStream® Fume Hood, ducted, (mm) 1829 x 958 x 1499

color

size

material

Labconco Protector® XStream® Fume Hood, ducted, (mm) 1219 x 958 x 1499

A constant sample mass-flow is of decisive importance for powerful dry dispersing. The controlled vibratory feeding unit Sympatec VIBRI, equipped with a built in amplitude controller feeds dry powders from 1 mg to 1,000 g constantly and independent of the load in the VIBRI funnel. VIBRI will be used with different HELOS dispersing units and as VIBRI/L also with QICPIC dispersing units in the laboratory. Using the on-line analyzers MYTOS or PICTOS with the dosing device VIBRI has the advantage of ensuring a well-defined and constant sample flow into the analysing system.

Sympatec VIBRI, intelligent vibratory feeder

Sympatec VIBRI L, intelligent vibratory feeder

AdvanceLab Stainless Steel Fume Hood is for igniting applications. Fumehood when sized with an appropriate chemical resistant centrifugal exhaust fan will protect laboratory staff from exposure to harmful fumes.

AdvanceLab Stainless Steel 304 Fume Hood, ducted, (mm) 1820 x 920 x 2420

AdvanceLab Stainless Steel 304 Fume Hood, ducted, (mm) 1220 x 920 x 2420

AdvanceLab Stainless Steel 304 Fume Hood, ducted, (mm) 1520 x 920 x 2420

AdvanceLab Stainless Steel 304 Fume Hood, ducted, (mm) 2420 x 920 x 2420

AdvanceLab Stainless Steel 316 Fume Hood, ducted, (mm) 1220 x 920 x 2420

AdvanceLab Stainless Steel 316 Fume Hood, ducted, (mm) 1520 x 920 x 2420

AdvanceLab Stainless Steel 316 Fume Hood, ducted, (mm) 1820 x 920 x 2420

AdvanceLab Stainless Steel 316 Fume Hood, ducted, (mm) 2420 x 920 x 2420

The most popular combination of shower and eyewash for industrial areas and laboratories. This floor-mounted combination unit of drench shower and eyewash with ABS plastic bowl comes with a foot pedal. The unit is very effective and highly recommended in accident-prone areas

AdvanceLab Emergency Shower, (mm) H2260 x D550

Liebherr pharmaceutical refrigerators safely store high-quality preparations and sensitive medications at all times. This is achieved by a combination of precise electronic controls, highly effective insulation, an optimised forced-air cooling system, and premium-quality workmanship. Visual and acoustic alarm systems warn of any temperature deviations.

Liebherr MKUv 1610 pharmaceutical refridgerator, +5 °C, 142 L, (mm) 601 x 618 x 820, with medicine drawers, Comfort controller, compliant with DIN 13277, steel door

The ultrasonic extinction spectrometer Sympatec OPUS analyses particle size distribution as well as concentration of your suspension or emulsion ranging from below 1 µm to 3 mm. For many years, OPUS is successfully operating in crystallization, grinding and homogenization processes and proves its manifold performances. With various applications, OPUS is repeatedly revealing new insights – not only in production lines but also in pilot plants and lab settings.

Sympatec OPUS, < 0.1 - 3,000 µm, ultrasonic extinction sensor

AdvanceLab student stools provide provide fabulous seating option for students in learning spaces. With the same dynamic properties of the chair, the stool allows users to lean forward on their seat pan, or sit back with their feet squarely put on the rail or support.

AdvanceLab student stool, seat height 460mm, 560mm, 660mm, 760mm

Laboratory refrigerators and freezers have to meet the highest criteria in terms of security and reliability. With Liebherr laboartory refrigerator and freezers, precise electronic controls, a forced-air cooling system and highly effective insulation work together to ensure outstanding energy efficiency, so that operating costs are low and the environment is protected. Advanced components and precision controls ensure that substances and materials are stored as optimally as possible.

Liebherr SRFfg 3501 laboratory refridgerator, +3 °C to +16 °C, 344 L, (mm) 597 x 654 x 1684, fan-assisted cooling, spark-free interior, steel door

Asecos UB-LINE safety storage cabinets are for the storage of flammable hazardous substances - perfectly under fume cupboards. The Asecos UB-S-90 cabinet is with practical drawers and 90 munites fire resistance.

Asecos UB-S-90 model UB90.060.110.2S cabinet, (mm) 1102 x 574 x 600,  left 1x drawer, 1x perforated insert; steel & stainless steel; right 1x drawer, 1x perforated insert; steel & stainless steel

Asecos UB-S-90 model UB90.060.140.2S cabinet, (mm) 1402 x 574 x 600,  left 1x drawer, 1x perforated insert; steel & stainless steel; right 1x drawer, 1x perforated insert; steel & stainless steel

The Heidolph Hei-PLATE Mix 'n' Heat Ultimate magnetic stirrer is equipped with numerous interfaces for automated laboratory processes. The RS232 and USB B ports allow a control via integrated Hei-PROCESS solution. You can actually integrate your device in Hei-CONTROL Pro software via the LAN interface. As of the middle of 2024, the LAN interface will additionally support the communication protocol OPC UA. The USB A interface at the front allows data logging via a USB stick. For more comfort and safety, you can connect the Heidolph Hei-PLATE Mix 'n' Heat Ultimate magnetic stirrer with the electric Heidolph lab jack via the USB C interface.

Heidolph Hei-PLATE Mix 'n' Heat Ultimate magnetic stirrer, 145 mm, 20 L, [oC] 20 - 350, Pt100/ Pt1000 ext. temp. sensor, RS232, RJ45 (LAN), USB A, USB B, USB C connection interfaces

Heidolph Hei-PLATE Mix 'n' Heat Ultimate magnetic stirrer, 135 mm, 20 L, [oC] 20 - 350, Pt100/ Pt1000 ext. temp. sensor, RS232, RJ45 (LAN), USB A, USB B, USB C connection interfaces

Liebherr SFFsg 4001 laboratory freezer, −9 °C to −30 °C, 316 L, (mm) 597 x 654 x 1884, plastic inner liner, steel door

Construction of electrogalvanised steel with heavy epoxy powder coated, the AdvanceLab tall storage cabinets are suitable for storage laboratory document, labware, small instruments and so on. A ventilation port is available upon request for exhaust connection.

AdvanceLab Tall Storage Cabinet, (mm) 900 x 500 x 2100, solid doors, 5 shelvings, electrogalvanised steel

Liebherr LKexv 1800 laboratory refrigerator, +1 °C to +15 °C, 180 L, (mm) 600 x 600 x 860, mechanical control system, spark-free interior, steel door

AdvanceLab Ductless Fume Hood is ideal for applications where only solvents are used. Activated carbon filters are for your wide range solvents.

AdvanceLab Ductless Fume Hood, (mm) 1220 x 750 x 2420

AdvanceLab Ductless Fume Hood, (mm) 920 x 750 x 2420

AdvanceLab Ductless Fume Hood, (mm) 1520 x 750 x 2420

AdvanceLab Ductless Fume Hood, (mm) 1820 x 750 x 2420

Asecos Q-LINE safety storage cabinets are for the storage of flammable hazardous substances with integrated transport base. The Asecos Q-CLASSIC-90 cabinet is with classic wing doors and 90 minutes fire resistance.

Asecos Q-CLASSIC-90 model Q90.195.120 cabinet, (mm) 1193 x 615 x 1953,  3x shelf, 1x perforated insert, 1x bottom collecting sump; steel

Asecos Q-CLASSIC-90 model Q90.195.090 cabinet, (mm) 893 x 615 x 1953,  3x shelf, 1x perforated insert, 1x bottom collecting sump; steel

Asecos Q-CLASSIC-90 model Q90.195.060 cabinet, (mm) 599 x 615 x 1953,  3x shelf, 1x perforated insert, 1x bottom collecting sump; steel

Liebherr SRFfg 4001 laboratory refridgerator, +3 °C to +16 °C, 394 L, (mm) 597 x 654 x 1884, fan-assisted cooling, spark-free interior, steel door

Sympatec MULTISAMPLER has been developed for users having high sample throughtput with one disperser and one sensor. The fully-automated handling robots MULTISAMPLER/dry and MULTISAMPLER/wet master dry and wet applications. They are used for particle sizing with laser diffraction sensor HELOS and for particle size and particle shape analysis with image analysis sensor QICPIC.

Sympatec MULTISAMPLER DRY, high sample throughput dosing unit

Sympatec MULTISAMPLER WET, high sample throughput dosing unit

Metal in-line fan designed to extract easy-to-burn gases with the inlet and outlet dimension of 125mm

AdvanceLab Metal In-line Fan, Ø125mm, 2570RPM

Metal in-line fan designed to extract easy-to-burn gases with the inlet and outlet dimension of 100mm

AdvanceLab Metal In-line Fan, Ø100mm, 2530RPM

Metal in-line fan designed to extract easy-to-burn gases with the inlet and outlet dimension of 160mm

AdvanceLab Metal In-line Fan, Ø160mm, 2390RPM

Metal in-line fan designed to extract easy-to-burn gases with the inlet and outlet dimension of 200mm

AdvanceLab Metal In-line Fan, Ø200mm, 2400RPM

Metal in-line fan designed to extract easy-to-burn gases with the inlet and outlet dimension of 250mm

AdvanceLab Metal In-line Fan, Ø250mm, 2410RPM

Metal in-line fan designed to extract easy-to-burn gases with the inlet and outlet dimension of 315mm